LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Continuously Variable Transmission (Diagnostics) (2 Of 2) >> Diagnostic Procedure With Diagnostic Trouble Code (DTC) >> DTC P2747: Intermediate Shaft Speed Sensor "B" Circuit No Signal >> General Description >> Diagnostic Method

Diagnostic Method

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

JUDGMENT VALUE SPECIFICATION

Malfunction Criteria Threshold Value
Measured primary pulley shaft speed 0 rpm

Time needed for diagnosis:  0.5 s

Malfunction indicator light illumination:  Illuminates as soon as a malfunction occurs.

scientia non olet · About LEMON Manuals