Solenoid Unit

Remove the select lever. Ref. to CONTROL SYSTEMS>Select Lever>REMOVAL .
Remove the spacer and gasket. Ref. to CONTROL SYSTEMS>Select Lever>DISASSEMBLY>SELECT LEVER .
Remove the connector.

Courtesy of SUBARU OF AMERICA, INC.
Raise the claw with a flat tip screwdriver, etc. and remove the solenoid unit.

Courtesy of SUBARU OF AMERICA, INC.
Pull out the terminal of the solenoid unit using KTC connector terminal tool (part number: ECC-1T).
NOTE: A flat tip precision screwdriver with a tip width of 1.3 mm (0.05 in) or less can also be used.

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Wiring color
3	Blue
4	Black