LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Forester Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical System >> Crank Pulley >> Removal

Crank Pulley: Removal

NOTE: When replacing a single part, perform the work with the engine assembly installed to body.
  1. When working on the vehicle
    NOTE: When working on the vehicle, perform the following steps also.
    1. Remove the air intake duct. Ref. to INTAKE (INDUCTION) (H4DO)>AIR INTAKE DUCT>REMOVAL .
  2. Remove the V-belts. Ref. to MECHANICAL (H4DO)>V-belt>REMOVAL>V-BELT .
  3. Use the ST1 and ST2 to lock the crank pulley, remove the crank pulley bolt.
    NOTE: To prevent damaging ST1, attach the ST2 onto the ST1 as shown in the figure below.
    G08316897Courtesy of SUBARU OF AMERICA, INC.

    Preparation tool: 

    ST1: PULLEY WRENCH (18355AA000)

    ST2: PULLEY WRENCH PIN SET (18334AA000)

    G13224324Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the crank pulley.
scientia non olet · About LEMON Manuals