Sunroof System: Sunshade: Installation

CAUTION:

Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
For installation of the cover assembly stereo camera, refer to "INSTALLATION", "Stereo Camera" in the "EyeSight" service information and observe the precautions for installation. Ref. to EYESIGHT>STEREO CAMERA>INSTALLATION .

Install the shade assembly.
Install the bracket sunroof and the frame sunroof.
Tightening torque:

6 N.m (0.61 kgf-m, 4.4 ft-lb)
Install the bolt which secures the curtain airbag module.
Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Connect the harness connector of the tube drain and the motor assembly.
CAUTION: Insert the tube drain until it contacts the end of drain pipe (a).

Courtesy of SUBARU OF AMERICA, INC.
Install the trim panel sub assembly. Ref. to EXTERIOR/INTERIOR TRIM>ROOF TRIM>INSTALLATION .
Connect the ground terminal to battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .