LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Forester Base >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Sunroof System >> Sunroof Switch >> Inspection

Sunroof Switch: Inspection

  1. Disconnect the harness connector of sunroof switch.
  2. Measure the resistance between connector terminals.

    Preparation tool: 

    Circuit tester

    G13226965Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    1 - 3 OPEN Less than 1 Ω
    4 - 3 CLOSE Less than 1 Ω
  3. Replace the sunroof switch if the inspection result is not within the standard value.
scientia non olet · About LEMON Manuals