LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Forester Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Seat Heater System >> Installation >> Seat Heater Control Module

Seat Heater Control Module

  1. Install the rear seat heater control module.

    Tightening torque: 

    13 N.m (1.3 kgf-m, 9.6 ft-lb)

  2. Install the trim panel assembly apron and the trim panel assembly D pillar. Ref. to EXTERIOR/INTERIOR TRIM>REAR QUARTER TRIM>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
scientia non olet · About LEMON Manuals