LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Forester Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Rear Seat >> Installation

Rear Seat: Installation

CAUTION:
  • Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  • Side impact sensor (under the rear center seat) for the airbag system is located under the front center of the rear seat cushion. Be careful not to apply strong impact to the sensor when working with the rear seat cushion removed.
  1. Install the backrest assembly RH and LH.

    Tightening torque: 

    Refer to "COMPONENT" of "General Description" for the tightening torque. Ref. to SEATS>General Description>COMPONENT>REAR SEAT .

    NOTE:
    • After installing the backrest assembly, make sure that each seat belt operates normally.
    • Make sure that they are properly secured on each hook on the vehicle side.
  2. Install the rear seat cushion assembly.
    CAUTION:
    • For models with the seat heater and models with the seating sensor, connect the connectors securely.
    • Check routing of each buckle and reclining strap of the seat belt.
  3. Connect the ground terminal to battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
scientia non olet · About LEMON Manuals