LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Forester Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Remote Openers >> Installation >> Front Hood Opener

Front Hood Opener

CAUTION: Install the mud guard front so that the front end of the mud guard (b), except for the clip fixing point, comes inside the bumper face (a).
G13226183Courtesy of SUBARU OF AMERICA, INC.
  1. Before installation, check the following items.
    • Cable is free from deformation such as fray.
  2. Install the cable assembly front hood.
    NOTE: Tie and pull the string attached to the body into the vehicle to install the cable clip and cable front hood.
  3. Install the opener handle.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  4. Install the lock assembly front hood. Ref. to SECURITY AND LOCKS>Front Hood Lock Assembly>INSTALLATION .
  5. Install the cover LWR driver. Ref. to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>INSTALLATION .
  6. Install the mud guard front LH. Ref. to EXTERIOR/INTERIOR TRIM>MUD GUARD>INSTALLATION .
  7. Connect the ground terminal to battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
scientia non olet · About LEMON Manuals