Inspection Mode 1
| DTC | Item | Note |
|---|---|---|
| B2600 | LIN Communication | - |
| B2601 | LIN Circuit Low | - |
| B2602 | Vehicle Speed Control | - |
| B2603 | EPB Control | - |
| B2605 | Battery Control Low | - |
| B2607 | Seat Motor Relay Failure | - |
| B2608 | Seat SW Failure | - |
| B2609 | IG | - |
| B260A | ACC | - |
| B2621 | MIRROR SW ANOMALOUS STATE | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Power Seat Memory]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the DTC of [Power Seat Memory] to check that there is no DTC displayed. Ref. to POWER SEAT MEMORY (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.
After solving the DTC, repeat from step 1). - Turn the ignition switch ON → OFF, and wait for 45 seconds or more.
- Turn the ignition switch OFF → ON, and wait for 5 seconds or more.
- Using the Subaru Select Monitor, read the DTC of [Power Seat Memory] to check that there is no DTC displayed. Ref. to POWER SEAT MEMORY (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.