High-Mounted Stop Light: Inspection

Apply battery voltage between the connector terminals to check the lighting condition of the light.

Roof spoiler type

Courtesy of SUBARU OF AMERICA, INC.

Rear gate type

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Specification
1 (+) - 2 (-)	Apply battery voltage.	Light ON

Replace the light assembly high-mounted if faulty is found in the inspection.
NOTE: Since LED (Light Emitting Diode) is used for the high-mounted stop light, replace the light assembly high-mounted if the light does not illuminate.