LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Forester Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control System (Diagnostics) >> Registration Body Integrated Unit >> Operation >> Confirm Current Setting

Confirm Current Setting

  1. On [Start] screen, select [Diagnosis].
  2. On [Vehicle selection] screen, input the target vehicle information and select [OK].
  3. On [Main Menu] screen, select [Each System].
  4. On [Select System] screen, select [Body Control], and then select [Enter].
  5. On [Select Function] screen, select [Customize].
  6. Save the setting.
    REQUIRED ITEMS FOR NEW REGISTRATION (EXCEPT FOR SYSTEM NOT EQUIPPED)

    Item Contents Remarks
    Off delay time OFF
    10 Sec
    20 Sec
    30s    		 -
    Auto Light Sensitivity Adjustment Dull
    Normal
    Sensitive
    Very sensitive    		 -
    Remote Trunk Open/Power Rear Gate Open Function OFF
    Press twice
    Press and hold    		 -
    Power rear gate setting Exist
    Not Exist    		 -
    Lane change signal setting Exist
    Not Exist    		 -
    Rear wiper auto setting Exist
    Not Exist    		 -
    Driver's Door Unlock Setting ALL
    Selection    		 Set only for vehicles with keyless access with push button start system
    Rear Gate Unlock Setting ALL
    Selection    		 Set only for vehicles with keyless access with push button start system
    Daytime Running Light(DRL) Setting for North America High Beam Dimming System
    Low Beam Dimming System
    Alternate DRL System    		 -
    Wiper link Auto Light Setup ON
    OFF    		 -
    Steering Wheel Left
    Right    		 -
    Vehicle Automatic Door Lock OFF
    Vehicle Speed
    Select Lever P    		 -
    Vehicle Automatic Door Unlock OFF Select Lever P Power OFF Driver Door Open -
    P/W ECU Setting No Support
    Driver Seat
    Driver/Passenger Seat
    Four Seat    		 -
    Sunshade ECU Setting Exist
    Not Exist    		 -
    Steering Responsive Fog Lamp Setting Exist
    Not Exist    		 -
    Ambient Light Setting Exist
    Not Exist    		 -
    Ambient Light Setup OFF
    ON    		 -
    Head Lamp Low Beam Specification Halogen
    HID
    LED    		 -
    Head Lamp High Beam Specification Halogen
    HID
    LED    		 -
    High Beam Assist Current Setting ON
    OFF    		 -
    High Beam Assist Function Setting (mirror/EyeSight) Not Exist mirror HBA
    EyeSight HBA    		 -
    Vehicle Automatic Door Lock/Unlock and Impact Detection Door Lock Setting Exist
    Not Exist    		 -
    Rr Defogger op. mode Normal
    Continuous    		 -
    Security Alarm Setup ON
    OFF    		 -
    Impact Sensor Setup ON
    OFF    		 Set to OFF.
    Alarm delay setup ON
    OFF    		 -
    Lockout prevention ON
    OFF    		 -
    Impact sensor Exist
    Not Exist    		 Set to No.
    Answer-back buzzer setup ON
    OFF    		 -
    Hazard answer-back setup ON
    OFF    		 -
    Door open warning Exist
    Not Exist    		 -
    Dome Light Alarm Setting ON
    OFF    		 -
    Auto A/C Setting Active
    OFF    		 -
    wiperdeicer Exist
    Not Exist    		 -
    Sedan/Wagon Setting Wagon
    Sedan    		 -
    MT/AT Setting MT
    AT    		 -
    Rain drop Detection Sensor Setting Exist
    Not Exist    		 -
    Seat Memory Setting Exist
    Not Exist    		 -
    Illumination Sensor Setting Exist
    Not Exist    		 -
    Factory initial setting Factory
    Market    		 Do not set to Factory mode.
    Auto Wiper/INT Setting AUTO
    INT    		 -
    EPB setting Exist
    Not Exist    		 -
    Sunroof setting Exist
    Not Exist    		 -
    Welcome Light Off Delay Time(Approaching) OFF
    30 seconds
    60 seconds
    90 seconds    		 -
    Welcome Lighting (Exiting) OFF
    30 seconds
    60 seconds
    90 seconds    		 -
    Keyless Buzzer Volume 1
    2
    3
    4
    5
    6
    7    		 -
    Auto Dimmer Cancel Setting 0 (OFF)
    Least Less
    Normal More
    Most    		 -
    Security horn sound Exist
    Not Exist    		 -
scientia non olet · About LEMON Manuals