Execution Condition

Secondary parameters	Execution condition
12 V battery system voltage Engine speed	10 V or more 1000 rpm or more
Transmission range Engine torque Commanded duty of torque converter clutch pressure control solenoid	Drive Exceeds N-m values in Tables below 0% or less

TEMPERATURE SPECIFICATION (2.0 L MODEL)

		Engine coolant temperature (degC)
		- 40	- 20	0	20	40	60	80	100
Vehicle speed (calculated from measured secondary pulley shaft speed sensor) (MPH)	0	150	150	150	150	150	150	134	134
	13	150	150	150	150	150	150	142	142
	25	150	150	150	150	150	150	150	150
	38	150	150	150	150	150	150	150	150
	50	150	150	150	150	150	150	150	150

TEMPERATURE SPECIFICATION (2.5 L MODEL)

		Engine coolant temperature (degC)
		- 40	- 20	0	20	40	60	80	100
Vehicle speed (calculated from measured secondary pulley shaft speed sensor) (MPH)	0	170	170	170	170	170	170	113	113
	13	170	170	170	170	170	170	142	142
	25	170	170	170	170	170	170	150	150
	38	170	170	170	170	170	170	168	168
	50	170	170	170	170	170	170	170	170