DTC P2746: Intermediate Shaft Speed Sensor "B" Circuit Range/Performance: Notes

1. -

DTC detecting condition:

Immediately at fault recognition

Trouble symptom:

Standing start problems
Shock occurs when engaging the lockup clutch.
Shock occurs when selecting shift position.

CAUTION: After servicing or replacing faulty parts, perform the last step of the basic diagnostic procedure. Ref. to TRANSMISSION (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .

CHECK DTC .
Read the DTC using Subaru Select Monitor. Ref. to TRANSMISSION (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .

Besides DTC P2746, is DTC P2747 or P2751 displayed?

Yes : Perform the diagnosis according to DTCs other than P2746. Ref. to TRANSMISSION (DIAGNOSTICS)>Diagnostic Trouble Code (DTC)>LIST .

No : Perform the diagnosis according to DTC P2747. Ref. to TRANSMISSION (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC P2747: INTERMEDIATE SHAFT SPEED SENSOR "B" CIRCUIT NO SIGNAL .