Execution Condition
| Secondary parameters | Execution condition |
|---|---|
| Phase 1 12 V battery system voltage Engine speed |
10 V or more At or more than rpm values in Table below |
| Phase 2 Fail detected (P0867) 12 V battery system voltage Ignition state Measured turbine shaft speed Transmission fluid temperature |
TRUE 10 V or more OFF 400 rpm or less -20 degC or more |
TARGET LINE PRESSURE SPECIFICATION
| Target line pressure (kPa) | 0 | 500 | 1000 | 1500 | 2000 | 3000 | 4000 | 5000 | 6000 |
| Engine speed (rpm) | 1049 | 1189 | 1328 | 1467 | 1610 | 1916 | 2535 | 8000 | 8000 |