LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Limited >> Repair and Diagnosis >> Electrical >> Charging Systems >> Engine Starting System & Charging System (Except For HEV) >> Auto Start Stop OFF Switch >> Removal

Auto Start Stop OFF Switch: Removal

NOTE: Auto Start Stop OFF switch is installed only on models with Auto Start Stop.
  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the instrument panel lower cover. Ref. to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>REMOVAL .
  3. Release the claws and remove the Auto Start Stop OFF switch.
scientia non olet · About LEMON Manuals