Inspection Mode Ag
| DTC | Description and trouble part | Condition | Number of driving cycles on the detecting condition |
|---|---|---|---|
| P04C1 | FUEL FILL DOOR UNLOCK CONTROL CIRCUIT LOW | - | 1 |
| P2421 | EVAP SYSTEM VENT VALVE STUCK OPEN | - | 1 |
NOTE:
Perform the inspection mode after warming up the engine except that the engine coolant temperature at engine start is specified
.
- Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
- Using the Subaru Select Monitor, perform the clear memory of [Engine]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
- Turn the ignition switch to ON, and wait for 10 seconds or more.
- Read the temporary code using the Subaru Select Monitor or general scan tool. Ref. to COMMON (DIAG)>DIAGNOSTIC TROUBLE CODE (DTC) .