LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag System >> Front Sub Sensor >> Installation

Front Sub Sensor: Installation

  1. Before installation, inspect the following items and replace any faulty part with a new part.
    • Front sub sensor damage
    • Connector is free from damage.
  2. Install the front sub sensor.
    CAUTION:
    • Do not reuse the bolt and nut. Always replace with the specified new bolts and nuts.
    • When installing the sensor, insert the set pin on the backside of the sensor into the hole on the body side securely.

    Tightening torque: 

    13 N.m (1.3 kgf-m, 9.6 ft-lb)

  3. Install the air intake duct. (RH side only)
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: For the hybrid model, connect the battery negative terminal.
scientia non olet · About LEMON Manuals