LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag System >> Front Door Impact Sensor >> Installation

Front Door Impact Sensor: Installation

  1. Before installation, inspect the following items and replace any faulty part with a new part.
    • The front door impact sensor or connector is damaged.
    • Inner panel area of the panel assembly - front door is deformed.
    • Side airbag module has been activated.
  2. Install the front door impact sensor.
    CAUTION:
    • Do not reuse the front door impact sensor if it is once removed. Be sure to replace the front door impact sensor with a new part.
    • The nuts cannot be removed from the front door impact sensor. Do not remove the mounting nuts.
    • Thoroughly clean the sensor mounting area before installing the front door impact sensor.
    • When the front door impact sensor is installed, be sure to fix the claws of the front door impact sensor into the door panel.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  3. Install the plate - door UPR.
  4. Install the sealing cover.
  5. Install the trim panel - front door.
  6. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: For the hybrid model, connect the battery negative terminal.
scientia non olet · About LEMON Manuals