LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> General Information >> Identification >> General Information & Specifications >> Recommended Materials >> Grease

Recommended Materials: Grease

Use grease and supplementary lubricants shown in the table below.

Item Application point Application point Recommended materials (item No.) Alternative
Supplementary lubricants Exhaust Oxygen sensor Spray type lubricant (004301003) -
Grease MT MT main shaft (spline parts) NICHIMOLY N-130 -
MT main shaft (oil seal lip)
Transfer driven gear (front roller bearing, rear roller bearing)
Clutch operating cylinder
Clutch release bearing (inner circumference)
Clutch release lever
Clutch master cylinder push rod SILICONE GREASE G-40M -
Gear shift lever 5MT: NIGTIGHT LTS No. 2 grease
6MT: Multemp HL-D
-
Clutch pedal NIGTIGHT LTS No. 2 grease -
Brake MT brake pedal
CVT brake pedal (Crosstrek model)
CVT brake pedal (Impreza model) Multemp TAS No. 2 -
Clevis pin connecting the operating rod and brake pedal Impreza model: Shell
Gadus S2 V220
Crosstrek model: NIGTIGHT LTS No. 2 grease
-
Select lever Sliding section of respective parts Multemp D No. 2 -
Select lever COMPL end portion (hybrid model) Multemp SH-K II
Door Door latch SILICONE GREASE G-30M (004404002) -
Door striker
Steering Steering gearbox (rack and pinion) Multemp AC-P -
Steering gearbox (boot and tie-rod installation parts) SILICONE GREASE G-40M -
Brake Disc brake (lock pin, guide pin) NIGLUBE RX-2 (000041000) -
Brake pad clip Molykote M7439 -
Between rear brake pad and shim WAKO grease V160 -
Brake shoe (parking brake) Molykote 44MA -
Drive shaft Front drive shaft (IN side) NKG302 -
Rear drive shaft NKG814 -