LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Intake System (Induction) >> Collector Cover >> Removal

Collector Cover: Removal

NOTE: The collector cover is equipped only on hybrid models.
  1. Remove the collector cover in the order shown in the figure.
    CAUTION: The operation must be carefully performed; otherwise the collector cover may be damaged.
    NOTE: Check the cushion (a) and grommet (b) for peel-off or disengagement.
    G13229941Courtesy of SUBARU OF AMERICA, INC.
    1. Pull up the collector cover at portion (A) and pull out the protrusion at the collector cover backside from the grommet (B).
    2. Slide the collector cover towards the front of the vehicle to remove the collector cover from the collector cover bracket (C).
    G13229942Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the collector cover bracket.
    NOTE: Perform this procedure only when required.
    G13229943Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals