LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Front Exhaust Pipe >> Removal

Front Exhaust Pipe: Removal

CAUTION: Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: For the hybrid model, disconnect the battery negative terminal.
  2. Remove the crossmember support - rear LH. Ref. to FRONT SUSPENSION>CROSSMEMBER SUPPORT>REMOVAL .
  3. Disconnect the front oxygen (A/F) sensor connector, rear oxygen sensor connector and the ground cord.
    G11253533Courtesy of SUBARU OF AMERICA, INC.
  4. Separate the front exhaust pipe and rear exhaust pipe.
    NOTE: Suspend the rear exhaust pipe with rope etc.
    G11253535Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the bolt which holds front exhaust pipe to hanger bracket.
    G11253536Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the front exhaust pipe.
    CAUTION: The front exhaust pipe is very heavy. Be careful not to drop it when removing.
    • Except for hybrid model
      G13224642Courtesy of SUBARU OF AMERICA, INC.
    • Hybrid model
      G13230500Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals