LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Remote Openers >> Installation >> Fuel Lid >> Hybrid Model

Hybrid Model

  1. Install the saucer - COMPL.
    NOTE: Securely install the rubber portion of the saucer - COMPL to the fuel filler pipe assembly.
  2. Attach the ring clips.
    CAUTION: Do not reuse the ring clip and replace with a new part, because engagement of the claw weakens.
  3. Install the fuel filler pipe protector.
  4. Install the fuel filler cap.
  5. Install the flap - COMPL fuel.
  6. Install the drain filter assembly. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DO (EXCEPT FOR HEV))>DRAIN FILTER>INSTALLATION .
  7. Install the mud guard - rear RH. Ref. to EXTERIOR/INTERIOR TRIM>MUD GUARD>INSTALLATION .
  8. Install the lock assembly - fuel.
  9. Connect the fuel flap status switch connector.
  10. Install the battery cooling blower assembly. Ref. to HYBRID ELECTRIC VEHICLE>HIGH VOLTAGE BATTERY COOLING SYSTEM>INSTALLATION>COOLING BLOWER .
  11. Install the trim panel - rear apron RH. Ref. to EXTERIOR/INTERIOR TRIM>REAR QUARTER TRIM>INSTALLATION>5 DOOR MODEL (HYBRID) .
  12. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals