Rear Gate Opener Button: Inspection

Measure the resistance between connector terminals.

Preparation tool:

Circuit tester

Keyless entry model

Courtesy of SUBARU OF AMERICA, INC.

Model with keyless access with push button start

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Standard
1 - 2	When the switch is not pressed (CLOSE)	1 MΩ or more
1 - 2	When the switch is pressed (OPEN)	Less than 5 Ω

If the inspection result is not within the standard, replace the button - opener rear gate.