LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Push Button Ignition Switch >> Installation

Push Button Ignition Switch: Installation

  1. Install the switch - push button start.
  2. Install the panel - starter SW.
  3. Install the visor assembly - combination meter.
  4. Install the grille assembly - CTR ventilation LH. Ref. to AIR CONDITIONER (EXCEPT FOR HEV)>AIR VENT GRILLE>INSTALLATION .
  5. Install the cover assembly - instrument panel LWR driver.
  6. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: For the hybrid model, connect the battery negative terminal.
scientia non olet · About LEMON Manuals