LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (Fuel Injection System (HEV)) >> Intake Manifold Assembly >> Disassembly

Intake Manifold Assembly: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. When the engine coolant (engine side) is drained before removing the intake manifold assembly
    1. Remove the throttle body. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO(HEV))>THROTTLE BODY>REMOVAL .
  2. Remove the purge control solenoid valve. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DO(HEV))>PURGE CONTROL SOLENOID VALVE>REMOVAL .
  3. Remove the EGR pipe. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DO(HEV))>EGR PIPE>REMOVAL .
  4. Remove the manifold absolute pressure sensor. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO(HEV))>MANIFOLD ABSOLUTE PRESSURE SENSOR>REMOVAL .
  5. Remove the engine wiring harness stay (A) and collector cover bracket (B).
G13230827Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals