Intake Manifold Assembly: Assembly

WARNING: This page is about a different variant/trim than selected.

Install the engine wiring harness stay (A) and collector cover bracket (B).
Tightening torque:

6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

Courtesy of SUBARU OF AMERICA, INC.
Install the manifold absolute pressure sensor. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO(HEV))>MANIFOLD ABSOLUTE PRESSURE SENSOR>INSTALLATION .
Install the EGR pipe. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DO(HEV))>EGR PIPE>INSTALLATION .
Install the purge control solenoid valve. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DO(HEV))>PURGE CONTROL SOLENOID VALVE>INSTALLATION .
When the engine coolant (engine side) is drained before removing the intake manifold assembly
1. Install the throttle body. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO(HEV))>THROTTLE BODY>INSTALLATION .