LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Ascent Limited >> Repair and Diagnosis >> General Information >> Identification >> General Information & Specifications >> Pre-Delivery Inspection >> Front Hood Lock Release >> Delivery Mode

Delivery Mode

  1. Turn the ignition switch to OFF and install the delivery mode fuse.
    CAUTION: Do not use any fuses that are installed on the vehicle.
    G13862195Courtesy of SUBARU OF AMERICA, INC.
  2. Turn the ignition switch to ON and check that the malfunction indicator light starts blinking.
  3. If the malfunction indicator light blinks, return the ignition switch to LOCK.
  4. Remove the delivery mode fuse and attach it to the spare fuse holder provided on the fuse box cover.
  5. Then, turn the ignition switch to ON again.
  6. Make sure that the malfunction indicator light is off. If the malfunction indicator light blinks, carry out an engine diagnosis.
  7. Perform the clear memory operation.
    CAUTION: If the delivery mode fuse is removed, the DTC related to the MFD is recorded. Be sure to clear the memory after installing the delivery mode fuse.
scientia non olet · About LEMON Manuals