Shift Lock Solenoid and P Range Switch: Inspection

Courtesy of SUBARU OF AMERICA, INC.

• Measure the resistance between "P range" switch connector terminals.

  Terminal No.	Inspection conditions	Standard
  1 - 2	P range	Less than 1 Ω
  	Except for P range	1 MΩ or more

• Measure the resistance between the shift lock solenoid connector terminals.

  Terminal No.	Inspection conditions	Standard
  4 - 3	-	27.6 - 30.5 Ω

• Check the shift lock solenoid unit.

  Terminal No.	Inspection conditions	Standard
  3 (+) - 4 (-)	Apply battery voltage.	The shift lock solenoid operates properly.