LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Seat Heater System >> Installation >> Seat Heater Control Unit

Seat Heater Control Unit

  1. Install the rear seat heater control module.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  2. Install the trim panel assembly apron and the trim panel assembly D pillar.
  3. Install the third seats, Ref. to SEATS>Third Seat>INSTALLATION .
  4. Install the floor mat side, floor mat center, and box sub-trunk assembly.
  5. Connect the ground terminal to battery sensor, Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals