Front Seat: Installation

Bring the front seat inside the vehicle.
Connect the connectors located under the front seat.
Install the seat assembly.
CAUTION:
- Tighten the slide rail assembly installing bolts in the order as shown in the figure, in several steps by gradually increasing the torque until they reach the specified torque.
  
  Fig 1: Slide Rail Assembly Installing Bolts Tightening Sequence
  Courtesy of SUBARU OF AMERICA, INC.
- Securely install the bolt cover. Incorrect installation may result in deformation of claws or detachment while driving the vehicle.
Tightening torque:

53 N.m (5.4 kgf-m, 39.1 ft-lb)
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
Install the headrest assembly.
Regarding the passenger's seat, perform [Rezeroing] for the occupant detection system. Ref. to OCCUPANT DETECTION (DIAGNOSTICS)>REZERO .