LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Keyless Buzzer >> Inspection

Keyless Buzzer: Inspection

  1. Measure the resistance between connector terminals.

    Preparation tool: 

    Circuit tester

    G10277255Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    1 - 2 Always 270 - 330 Ω
  2. Replace the keyless buzzer if the inspection result is not within the standard value.
scientia non olet · About LEMON Manuals