LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Spot Map Light >> Inspection

Spot Map Light: Inspection

  1. Measure the resistance between connector terminals.

    Preparation tool: 

    Circuit tester

    G11245992Courtesy of SUBARU OF AMERICA, INC.
    • Light switch
      Terminal No. Inspection conditions Standard
      1 - 13 Switch OFF 1 MΩ or more
      Switch ON Approx. 18 Ω
    • Door switch
      Terminal No. Inspection conditions Specification
      1 - 4 Switch door Continuity exists
  2. Replace the cover assembly stereo camera if faulty is found in the inspection.
scientia non olet · About LEMON Manuals