LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> SUBARU Eyesight Assist Monitor System (Driver Assist) (Diagnostics) >> Control Module I/O Signal >> Electrical Specification

Electrical Specification

G13872887Courtesy of SUBARU OF AMERICA, INC.
Terminal No. Contents Measuring condition Standard
1 ← → Chassis ground Battery power supply Always 10 - 16 V
2 ← → Chassis ground Ignition power supply Ignition switch OFF - ON 0 V - 10 - 16 V
3 ← → Chassis ground GND Always Less than 1 Ω
4 CAN + Cannot be measured -
5 CAN- Cannot be measured -
6 - - -
7 - - -
8 - - -