Extension Case: Removal
- Remove the transmission body. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Transmission Assembly>REMOVAL .
- Remove the front wheel speed sensor. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Front Wheel Speed Sensor>REMOVAL
- Remove the clip (A), and remove the extension case mounting bolts.
- Remove the extension case using a plastic hammer and a crowbar wrapped with protection tape at the points shown in the figure.CAUTION: Be careful not to damage the oil seal of the extension case.
- Remove the transfer reduction driven gear shim.
- Remove the liquid gasket from the extension case and intermediate case.