LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Limited XT >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle (Tr690) (Service Information) >> Control Valve Body >> Removal

Control Valve Body: Removal

NOTE: The control valve body is a non-disassembly part.
  1. Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the oil pan and oil strainer. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Oil Pan>REMOVAL .
  3. Disconnect the connector.
    G13621970Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the control valve body.
    CAUTION: Be careful not to let the manual valve drop off.
    G13621971Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the pressure pipe No. 1, pressure pipe No. 2 and pressure pipe No. 3.
    NOTE: It may remain in the transmission case side.
    G13200053Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the O-rings from the pressure pipe No. 1, pressure pipe No. 2 and pressure pipe No. 3.
    G13200055Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals