LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Limited XT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Mechanical System (2.5L)) >> Chain Cover >> Disassembly

Chain Cover: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the oil filler cap.
    G11253248Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the engine oil filter and the oil pump union. Refer to LUBRICATION (H4DO)>Oil Filter>REMOVAL .
  3. Remove the oil pressure switch. Refer to LUBRICATION (H4DO)>Oil Pressure Switch>REMOVAL .
  4. Remove the engine oil temperature sensor. Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>Engine Oil Temperature Sensor>REMOVAL .
  5. Remove the oil control solenoid. Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>Oil Control Solenoid>REMOVAL .
  6. Remove the camshaft position sensor. Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>Camshaft Position Sensor>REMOVAL .
scientia non olet · About LEMON Manuals