LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Limited XT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Mechanical System (2.5L)) >> Chain Cover >> Assembly

Chain Cover: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install the camshaft position sensor. Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>Camshaft Position Sensor>INSTALLATION .
  2. Install the oil control solenoid. Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>Oil Control Solenoid>INSTALLATION .
  3. Install the engine oil temperature sensor. Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>Engine Oil Temperature Sensor>INSTALLATION .
  4. Install the oil pressure switch. Refer to LUBRICATION (H4DO)>Oil Pressure Switch>INSTALLATION .
  5. Install the engine oil filter and the oil pump union. Refer to LUBRICATION (H4DO)>Oil Filter>INSTALLATION .
  6. Install the oil filler cap.
scientia non olet · About LEMON Manuals