LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle (Tr580) (Service Information) >> Inhibitor Switch >> Removal

Inhibitor Switch: Removal

  1. Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the mat center tray.
    G13620985Courtesy of SUBARU OF AMERICA, INC.
  3. Release the shift lock using a screwdriver, etc. and shift the select lever to the "N" range.
    G13620986Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the select cable from the transmission main body.
    CAUTION: Do not apply excessive load while holding the part (a).
    G13591814Courtesy of SUBARU OF AMERICA, INC.
    G13225470Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the spring pin (A) and remove the shifter arm (B).
    G13603163Courtesy of SUBARU OF AMERICA, INC.
  6. Disconnect the connector and remove the inhibitor switch.
    G13603164Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals