LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Suspension >> Rear Suspension System >> Rear Shock Absorber >> Removal >> Sedan Model

Sedan Model

  1. Remove the mat trunk and the trunk trim panel side. Refer to EXTERIOR/INTERIOR TRIM>Trunk Room Trim>REMOVAL .
  2. Lift up the vehicle, and then remove the rear wheels.
  3. Remove the bolts and nuts, and lower the rear lateral link assembly rear.
    1. Remove the bolts and nuts on the lower side of stabilizer link rear.
    2. Remove the bolts and nuts from the lower side of the shock absorber assembly rear.
    3. Disconnect the rear axle housing and the rear lateral link assembly rear.
    Fig 1: Rear Lateral Link Assembly Rear, Bolts And Nuts Loosening Sequence (Sedan Model)
    G13620909Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the nuts on the upper side of shock absorber assembly rear.
    G13620910Courtesy of SUBARU OF AMERICA, INC.
  5. Lower the rear lateral link assembly rear, and remove the shock absorber assembly rear.
scientia non olet · About LEMON Manuals