LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (CVT Transaxle (Tr690) (Service Information)) >> Drive Plate >> Removal

Drive Plate: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission body. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Transmission Assembly>REMOVAL .
  2. Set the ST, and then remove the reinforcement drive plate, drive plate and crankshaft position sensor plate.

    Preparation tool: 

    ST: CRANKSHAFT STOPPER (498497300)

    G13621786Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals