LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Fuel Injection System (2.4L)) >> Oil Control Solenoid >> Removal >> Intake >> LH Side

LH Side

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the reservoir tank. Refer to COOLING (H4DOTC)>Reservoir Tank>REMOVAL
  3. Remove the clip securing the engine wiring harness.
    G13198291Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the connector (A) and remove the oil control solenoid.
    G13198292Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the backup ring from the oil control solenoid.
scientia non olet · About LEMON Manuals