LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Fuel Injection System (2.4L)) >> Knock Sensor >> Removal >> LH Side

LH Side

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the intercooler. Refer to INTAKE (INDUCTION) (H4DOTC)>Intercooler>REMOVAL .
  3. Disconnect the connector (A), connector (B) and connector (C), and remove the clip (D) and clip (E).
    G13619638Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the connector (A) and the clip (B).
    G13198270Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector (A) and remove the knock sensor using a claw-foot wrench.
    G13198300Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals