LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Fuel Injection System (2.4L)) >> Fuel Filler Pipe >> Assembly

Fuel Filler Pipe: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install the clamp to the filler tube.
  2. Install a new cushion (A).
    G13619737Courtesy of SUBARU OF AMERICA, INC.
  3. Install to the filler tube using a new drain filter and a new sub drain filter.
    G13618558Courtesy of SUBARU OF AMERICA, INC.
  4. Connect drain tube (A). Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>Fuel Delivery and Evaporation Lines>INSTALLATION>QUICK CONNECTOR CONNECTION (TYPE F) .
  5. Install the drain tube (A) to the clamp.
  6. Install a new clamp (B).
    G13619739Courtesy of SUBARU OF AMERICA, INC.
  7. Install the protector A.
    G13618563Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals