LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Fuel Injection System (2.4L)) >> Camshaft Position Sensor >> Removal >> Intake >> LH Side

LH Side

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Disconnect the connector (A) and remove the camshaft position sensor.
    G13198285Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals