LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Starting System & Charging System (2.4L)) >> Battery Sensor >> Removal

Battery Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the connector and ground terminal.
    G13619486Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the battery sensor.
CAUTION: The end of the bolt (a) of the battery sensor is crimped. Therefore, do not loosen the nut (b) to the crimped portion.
G13224904Courtesy of SUBARU OF AMERICA, INC.
G13619488Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals