Each Warning System Does Not Operate
- Before performing diagnosis, refer to "CAUTION" in "General Description". Refer to DRIVER MONITOR (DIAGNOSTICS)>General Description>CAUTION .
- Check "Check List for Interview", and describe conditions where the malfunctions occurred and information of the customer in detail. Refer to DRIVER MONITOR (DIAGNOSTICS)>CHECK LIST FOR INTERVIEW .
- CHECK COMBINATION METER
.
Perform the diagnosis for combination meter. Refer to BASIC DIAGNOSTIC PROCEDURE .
Is the check result OK?
Yes : Go to 2.
No : Perform the diagnosis according to the inspection for the combination meter.
- CHECK VDC
.
Perform the diagnosis for VDC. Refer to BRAKE CONTROL (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .
Is the check result OK?
Yes : Go to 3.
No : Perform the diagnosis according to the inspection for VDC.
- CHECK COCKPIT CONTROL MODULE
.
Perform the diagnosis for cockpit control system. Refer to COCKPIT CONTROL (DIAGNOSTICS)>Basic Diagnostic Procedure>PROCEDURE .
Is the check result OK?
Yes : Go to 4.
No : Perform the diagnosis according to the inspection for cockpit control system.
- CHECK DTC
.
Read the DTC of [Driver Monitor] using the Subaru Select Monitor. Refer to DRIVER MONITOR (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .
Are any DTCs displayed? (Current malfunction)
Yes : Perform the diagnosis for the displayed DTCs. Refer to DRIVER MONITOR (DIAGNOSTICS)>Diagnostic Trouble Code (DTC)>LIST .
No : Perform the interview to confirm the occurrence condition in detail. Inform the user that the recognition may not work properly with the current Driver Monitoring System, and have the user decide whether or not to use.