Auto Start Stop DC/DC CONVERTER 2
- Install the Auto Start Stop DC/DC converter 2 to the bracket.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the Auto Start Stop DC/DC converter 2 to the vehicle.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Connect the connector.
- Install the under cover assembly passenger. Refer to EXTERIOR/INTERIOR TRIM>Glove Box>INSTALLATION>BACK PANEL .
- Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .