LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake Switch >> Inspection >> Check Switch Assembly EPB

Check Switch Assembly EPB

  1. Check the resistance between switch assembly EPB terminals.

    Preparation tool: 

    Circuit tester

    G13199809Courtesy of SUBARU OF AMERICA, INC.
    Switch position Terminal No. Standard
    Press
    (Release)    		 5 - 2
    5 - 4    		 Less than 1 Ω
    Neutral 5 - 1
    2 - 4    		 Less than 1 Ω
    Pull
    (Lock)    		 5 - 1
    5 - 2    		 Less than 1 Ω
  2. Replace the switch assembly EPB if the inspection result is not within the standard value.
scientia non olet · About LEMON Manuals