LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Service Information) >> Stop Light Switch >> Removal

Stop Light Switch: Removal

CAUTION: Before handling the airbag system components, always refer to AIRBAG SYSTEM>General Description>CAUTION .
  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cover LWR driver. Refer to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>REMOVAL .
  3. Remove the knee airbag module. Refer to AIRBAG SYSTEM>Knee Airbag Module>REMOVAL .
  4. Remove the stop light switch assembly.
    1. Disconnect the stop light switch assembly connector.
    2. Remove the nut, and remove the stop light switch assembly.
G13199794Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals