LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Window Glass & Mirrors >> Rear Door Glass >> Installation

Rear Door Glass: Installation

  1. Install the glass assembly rear door.
    CAUTION: Avoid impact and damage to the door glass assembly.
  2. Install the sash assembly rear door partition and the glass rear door partition.

    Tightening torque: 

    Refer to GLASS/WINDOW/MIRRORS>General Description>COMPONENT>REAR DOOR GLASS .

  3. Install the running channel rear door.
    CAUTION: Check that the running channel is securely fixed to the door panel assembly and to the sash assembly.
  4. Install the rear sealing cover. Refer to EXTERIOR BODY PANELS>Sealing Cover>INSTALLATION>REAR SEALING COVER .
  5. Install the trim panel rear door. Refer to EXTERIOR/INTERIOR TRIM>Door Trim>INSTALLATION .
  6. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals